Draeger

Asepti BA Cleaner Disinfectant is a disinfectant and cleaning fluid. Neutral pH, dual-chain quaternary ammonium-based one-step disinfectant, detergent, deodorant with broad spectrum bactericidal efficacy. 10 minute contact times for broad spectrum of microorganisms.

Advantages:

• Blend of two quaternary Ammonium compounds
• Effective against bacteria, gungi, viruses, mould, mildew and prevents cross contamination.
• Neutral pH - Deodorizer
• Easy dosing with additional dosing unit
• High efficiency thanks to low usage concentrations in immersion baths

Application Instructions:

• Use disinfectant with caution
• Always read the label and product information before use
• Strictly observe the respective Drager instructions for use of respiratory mask, respiratory protection equipment, and the application instructions of the disinfectant manufacturer

DOSAGE: Concentration Exposure time (ml/L) (min.) Disinfection of respiratory protection devices and 12.5-10 respiratory protection equipment in immersion baths

DOSING TABLE – LIQUID: Litre(s) Concentration for use 1.25 %, 1 litre 12.5 ml, 2 litres 25 ml, 3 litres 37.5 ml, 4 litres 50 ml, 5 litres 62.5 ml, 8 litres 100 ml, 10 litres 125 ml, 20 litres 250 ml, 30 litres 375 ml

Application instruction Example:

8 litres = 1.25 % application solution = 100 ml disinfectant + 7.9 litres water. Add concentrated disinfectant according to the water volume, stir briefly. Solution can be used immediately. Replace diluted solution every working day. Asepti BA Cleaner Disinfectant 2 litre container 3505268 Dosing unit Manual pump adjustable dosing 3504008 Dosing pump Manual pump (preset at 25mls 3504009)

UN 1760 CORROSIVE LIQUID, N.O.S. (quaternary ammonium compound) Class 8 for land and sea transport Hazchem Code @X Danger - Causes severe skin burns and eye damage. Hazchem code: 2X

Drager Bayonet A1B1E1K1HgP3 R D, Combination Cartridge

Drager offer the ABEK P3 filter range as a means of protection from both toxic gases and vapors and also particles. This particular filter is an ABEK Class 1 Hg P3 R D filter which protects against a wide range of gases and particles. See the spec table for more information on the gases.

The filter class indicates the filters’ capacity and protects against class 1 gases and vapours. To determine whether this filter is suitable for your application it’s important to know the maximum permissible concentration of the substance you’re working with and the occupational exposure limit. The coloured rings around the casing of the filter will help identify which gases the gas filter protects against and whether it is suitable for particles.

This particular ABEK filter can be reused (for more than one work shift), however it’s important that you’re able to tell when your filter has come to the end of its life and can no longer be used.

CE-certified (EN 14387, EN 143:2000/A1:2006) Australian Standard AS /NZS 1716 certified (SAI Global)

For use with the X-plore 5500 Full Face masks

The Drager AX is a special type of gas filter with an Rd40 standard connection. The AX part of the gas filter will protect against gases and vapours of organic compounds with boiling point = 65 °C. The gas filter has an Rd40 connection in accordance to EN 148-1. This makes it suitable for masks with a standard connection including the X-plore 4340, 4740 and X-plore 6300. It can be used in applications including chemicals, automobiles, shipbuilding, metal processing and public utilities.

FEATURES:

• Low cost and effective in protecting against contaminants
• Come individually packaged to ensure optimal protection
• Coloured labels ensure the gases can be easily identified
• Shelf life of 6 years (from date of production

Please note: this is a single use filter and must be disposed of after use.

Drager Combination Filter, EN14387, 1140 A2B2P3 R D.

This A2B2P3 combination filter from Drager Safety offers protection against different gases and particulates. The gas filter part protects against gases and vapors of organic compounds and also inorganic gases and vapors. The particle part of the filter protects against dust and particulates and is up to 99.95% efficient in doing so. It’s also approved as a filter TH/M3 A2B2 P SL R (EN 12941/12942) for the Drager X-plore® 7500. It has an Rd40 thread connection which is standard in accordance to EN 148-1.

A huge range of applications can be faced using the A2B2P3 filter and Drager half and full face masks (with Rd40 connection). See the spec table for more information on the type of gases this filter protects against. Although the filter is classed as reusable it’s important to note that its usage depends on a number of factors. This includes your breathing resistance, the temperature and the atmosphere around you.

KEY FEATURES:

• Efficient and low in cost
• CE approved (EN 141:2000 re. EN 14387, EN 143:2000, EN 371) and SAI Global-approved (Australia)
• Can be used with standard thread face masks including the X-plore 6300
• Tough aluminium housing prevents filter damage
• Individual packaging ensures the filter is well protected
• Shelf life (from date of production) is 6 years
• Passed a dolomite test

Whether in the chemical, metal, or automotive industries, ship building, maintenance, supplies, or disposal: The Drager X-plore 5500 full face mask is the right solution for environments where not only increased respiratory protection is required, but also a clear vision is mandatory.

Benefits:

• Safe and comfortable fit
• Large field of view due to 180° lens from PC or Triplex
• Efficient ventilation system with separate interior half mask ensures a fog-free lens and unobstructed view.
• Versatile use The Dräger X-plore® 5500 is equipped with two lateral bayonet connections for use of the comprehensive Dräger X-plore® bayonet filter series.

Uses 6738817 Dräger Bayonet Combination Filter/Cartridge

Double and triple safety. The Dräger X-plore® 6300 meets stringent requirements with regard to reliability, secure fit and comfort. An economical full-face mask for professional use in industry. The mask body is made from durable and skin-friendly EPDM, with double-layer face seal and triple sealing edges which provides a secure and comfortable seal for every type of face. Wide field of view.

Benefits:

• Secure and comfortable fit
• 180° wide-angle
• 5-point harness
• Easy maintenance and logistics
• One size fits all

The Dräger X-plore® 6300 full-face mask is equipped with a Rd40 connection in accordance with EN 148-1 and can be combined with the extensive Dräger X-plore® Rd40 filter range.

The full face mask Dräger X-plore® 6530 is the successor to the Panorama Nova® RA masks, meeting the highest demands for quality, reliability and secure fit. The mask body made from EPDM is highly resistant and skin-friendly, offering high wearing comfort.

Benefits:

• Safe and comfortable fit
• A double sealing frame with threefold sealing edges offers safe protection and a secure fit for almost all face shapes.
• The mask body from durable EPDM ensures a great level of wearing comfort even during prolonged use.
• 5-point harness The comfortable 5-point harness ensures that the mask is easy and quick to don. Additionally, the wide strap design prevents the development of pressure points on the head.
• Large field of vision, the distortion-free lens with 180° wide angle guarantees a large field of vision with excellent peripheral vision. The lens is made from impact-proof polycarbonate with either a plastic or stainless steel lens frame available.
• Simple servicing and logistics One universal size simplifies logistics and storage. An inside barcode allows for ease of recording and servicing the mask inventory.
• Efficient ventilation system with separate interior half mask ensures a fog-free lens and unobstructed view.
• Clear voice communication, an integrated stainless steel voice diaphragm facilitates good communication.
• Versatile use The Dräger X-plore® 6530 is equipped with an Rd40 connection (40mm threaded) for use of the Dräger X-plore® Rd40 filter series.

X-plore 8000 Transport Case

The Dräger X-plore® 8000 filter series offers an extensive programme of various filter types for all essential application fields and protects against a number of gases and vapors.

DRA-6739545 Protection Against Particles and Organic Gasses and Vapors A2-PRSL - Organic gases and vapors with boiling point >65°C

The Draeger X-plore 8000 standard hoods
are made from a lightweight and cost-effective material and are intended for
limited use applications.

Kit includes:

• Battery (R59585)
• Charger (R55980)
• Belt (R59700)
• Comfort Pad (R59730)
• Breathing Hose (R59650)
• Black Helmet Head Piece (R58325)
• Air purifier (R59500)
• 1 x Tear-off Visor Protectors (R58328)

Filters sold separately